ESCAPE HOOK
This hook is intended to be used as an anchor in an engineered system for firefighter escape applications.
designed
in conjunction with members of FDNY as a component in their fire escape
system, this hook is intended to be a component of a system
specifically designed by a qualified person for firefighter escape.
All users must be trained in the proper usage of the system.
Manufactured of Forged Alloy Steel by Crosby, each unit has a Product
Identification Code (PIC) for material traceability. The Saddle of the
hook is designed to easily fit around pipes or framework, and the
machined tip is rated for full Working Load Limit. Meets the
requirement of NFPA 1983 - Standard on Fire Service Life Safety Rope
and System Components, for Light-use Auxiliary Equipment with a design
factor of 4.4:1..
- After use the hook must be inspected. Any evidence of paint
discoloration due to heat damage, hook deformation, or alteration is
cause for removal from service and replacement.
- Working Load Limit (lbs.)*: 1,124 lbs.
- Overall Length: 6.74".
- Width of Opening: 2.14"
- Eye Diameter: .44"
- Weight: .79 lbs.
DISCLAIMER:
Firefighter escape requires instruction and training. Firefighting and
associated operations are dangerous and may cause injury or death. It
is every firefighters responsibility to be trained and knowledgable on
their equipment and its intended use.
|
Order Status