The PAC II style is our most popular style of fire retardant hoods. The notched shoulder allows for proper drapage for added protection across the chest area. The longer length (3 inches longer than NFPA requires) assures that this hood will stay tucked inside other required equipment.
DESIGN – TWO PIECE with NOTCHED SHOULDER
HEAD DESIGN
LAYERS: 2 ply
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11inches
SIZING: One size fits all (universal size). Do not modify, change, or alter your protective hood in any manner.
BIB DESIGN
LAYERS: 2 ply
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN: From top of head to bottom of notched shoulder: 15 inches
OVERALL HOOD LENGTH: From top of head to bottom of apron: 21 inches
FACE OPENING MEASUREMENTS- Face opening is sewn with ½ inch elastic.
RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
STRETCHED: 15 inches
CONSTRUCTION
SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability. All bottom edges are bound with binding.
THREAD: 100% Nomex
CARE
Machine wash warm with regular detergent – no chlorine bleach. Tumble dry low heat
DO NOT commercially dry clean
CERTIFICATION
Meets or exceeds NFPA 1971-2007 Edition and is UL Certified. Meets or exceeds Cal/OSHA Standards.
WARRANTY INFORMATION
Your protective hood is warranted by the manufacturer to be free from defects in material and workmanship. This warranty does not cover normal wear or unusual exposures. This warranty is in lieu of all other warranties, express or implied, including but not limited to, implied warranties or marketability and / or fitness for a particular purpose. The manufacturer shall not be liable for incidental or consequential damages. |
Order Status