The PAC IIA Nomex style is constructed with a circular bib, a classic style with double layer coverage with an overall length of 18". The minimum NFPA length allows for proper drape - material will not bunch up.
Style: PAC IIA
DESIGN – TWO PIECE
HEAD DESIGN
LAYERS: 2 ply *
LENGTH: From top of head to neck: 13 inches
WIDTH: Back seam to top of face: 9 inches
Back seam to bottom of head: 11 inches
SIZING: One size fits all. Do not modify, change, or alter your protective hood in any manner.
BIB DESIGN
LAYERS: 2 ply *
LENGTH: 5 inches (front and back)
OVERALL HOOD LENGTH: From top of head to bottom of apron: 18 inches
FACE OPENING MEASUREMENTS
RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
STRETCHED:15 inches
Face opening is sewn with ½ inch elastic.
Click here for color options
Click here for info on material
CONSTRUCTION
SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability. All bottom edges are bound with binding.
THREAD:100% Nomex
CARE
Machine wash warm with regular detergent – no chlorine bleach
Tumble dry low heat
DO NOT commercially dry clean
CERTIFICATION
Meets or exceeds NFPA 1971-2007 Edition and is UL Certified. Meets or exceeds Cal/OSHA Standards.
WARRANTY INFORMATION
Your protective hood is warranted by the manufacturer to be free from defects in material and workmanship. This warranty does not cover normal wear or unusual exposures. This warranty is in lieu of all other warranties, express or implied, including but not limited to, implied warranties or marketability and / or fitness for a particular purpose. The manufacturer shall not be liable for incidental or consequential damages. |
Order Status